Author Topic: Brake disk surprise  (Read 1051 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave2103

  • S Class
  • *
  • Posts: 3
  • Gender: Male
  • Engine: 2.0L
  • Fuel: Diesel
  • Transmission: Manual
  • Trim: TS2
  • Year: 2011
Brake disk surprise
« on: May 11, 2019, 02:19:50 pm »
Hi all, I've been getting a bit of brake wobble at high speed braking & very low speed.
So I thought it's either the pads or disk warp, so I decided to change pads first & if that didn't resolve the issue I'd change the disks too.
As I took the wheel off I saw instantly what I'd guess was the problem! Have you noticed?

Offline ZookNc

  • S Class
  • *
  • Posts: 5
  • Gender: Male
  • Colour: Carbon Grey (28B) Metallic
  • Engine: 2.2L
  • Fuel: Diesel
  • Transmission: Manual
  • Trim: Sport
  • Year: 2010
Re: Brake disk surprise
« Reply #1 on: September 03, 2019, 09:17:23 am »
Hi Dave,

Mazda 6 OEM disks all seem to have a warping issue which leads to vibration under braking. I replaced mine with OEM style Brembos and I haven't had an issue since. Changing the pads is a good idea as well if you're changing the disks.

Concerning the broken wheel stud, although disconcerting, I don't think it would have anything to do with the wobble if the other lug nuts were properly tightened.

Hope this helps!