Mazda 6 Forums UK
Media Section => Members Gallery => Topic started by: Tinkz on October 25, 2011, 01:52:47 pm
-
This is my standard Mazda 6 2 litre Ts, and so far i have
Painted the calipers red
Cut off the back boxes and welded 2 3 and a half inch oval slash cut cherry bombs
12" Fusion sub woofer
18" Konig Graphite Grey wheels running 225/40 tyres
Side skirts pending as i need 4 new tyres :'(
(http://i400.photobucket.com/albums/pp83/T1NK/variousphotos020.jpg)
(http://i400.photobucket.com/albums/pp83/T1NK/cherrybombs001.jpg)
(http://i400.photobucket.com/albums/pp83/T1NK/mazda6001.jpg)
(http://i400.photobucket.com/albums/pp83/T1NK/mazda6003.jpg)
-
Verrrry nice! Whats the cost of the wheels? I need a new set for mine.
-
I bought the wheels for £82 and cost £50 in petrol to pick em up from leicestershire the outside rims need refurbishing as they had not been looked after by previous owners but i still thing im quids in an these 18s are better than my 16s (its all about the size) lol. the pcd for the 18s are 114.3 and i thought the .3 would stop em from fitting but the fit nicely. look on ebay and find yourself a bargain good luck. ;D
-
That looks mint! 8)
-
its certainly different! where did you get the kit?
theres usually plenty of slop in pcd, and wheels with a pcd of 115mm or 113mm will more than likely go on withut any bother. 0.3mm isnt very much. the important bit is the bore size.
-
I found the bodykit on ebay some guy was selling it for £300 and threw in some Halo Angel lights too which have been fitted will put pic up of lights in next couple of days, wanna get some red Halo Angels for the rear lights now ;D
Here is a link for the body kit this is new mine was second hand but was never fitted as the guy wrote of his car whilst playing with his turbo :(
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p0.m570.l1313&_nkw=yakuza+2+body+kit&_sacat=See-All-Categories