Mazda 6 Forums UK
Technical Section => Projects => Topic started by: aeroadster on June 16, 2018, 08:25:15 pm
-
I bought this set two years ago, and only just got round to installing them. Shame on me.
Here's my write up. https://ibb.co/album/juK5va (https://ibb.co/album/juK5va)
I connected the positive to the brown wire from my map reading light, and the negative just goes to any ground.
Here's some pics:
Just out of the box
(https://preview.ibb.co/iFRqhy/20180612_092852.jpg)
Near side front installed
(https://preview.ibb.co/dpZRNy/20180612_123937.jpg)
The drivers door sill
(https://preview.ibb.co/ijF0hy/20180613_211331.jpg)
The off-side rear sill
(https://preview.ibb.co/m46j9d/20180613_211307.jpg)
The difference between this and the drivers is purely down to the exposure level of my camera phone. They are the same colour and superb.